[Marco Bazzan, Manuel Marchiò, Matteo Leonardi]
This is an update of the measurement campaign on Shinkosha sample S#4 where several time consuming maps were recorded.
Calibration as in entry 1221
We started a XZ map but it looked a little blurred (Figure 1), so we decided to launch a new one with a smaller step along X (Figure2). In that case the detail is better. We then tried a XY map with a small step, resulting in a series of striations with a period of about 50 microns (Figure3).
A final XY map was taken on a larger area (Figure 4).
The incident power on the sample was always P = 10 W.