I checked the total time required to check all magnets we have for filter cavity, which is 863 seconds (14.4 minutes)

This check is a count of total time required to run the script. This count is done by writing some lines of codes inside the script. We can see this 863 seconds as attached Fig.1.

I also checked the time required for checking one magnet, which gives output as Fig.2 (54 seconds). Considering we have 16 magnets to check, the total measurement should be 54*16 = 864 ~ 863 which is consistent with the total time measurement.

Matteo suggests to do such check not only after earthquake, but maybe every month.