YuefanGuo - 19:10, Thursday 01 December 2016 (341)
Telescope for SHG has been finished
Member: Matteo, Yuefan, Eleonora
The design of the telescope did with some Matlab code, double checked with the JamMT program and it gave out a visually simulation of the telescope, showing in the attachment.During the mounting of the telescope, the maximum power of the Laser has been used. The detail of the practical telescope shows as below:
Focal length
F1--50.2mm
F2--62.9mm
F3--125mm
Distance:(Set the output of EOM as origin)
L1--37.5cm
L2--47.5cm
L3--58.5cm
Final beam waist--82.5cm
Final beam size(radius)--44.0854 micrometer
During the last check, I found out the distance between the Beamsplitter and the first turning mirror is 5cm longer the optical scheme shows, caused by my counting error of the holes.But since behind this part there are some space left, so I thought maybe we can leave it like this.
The design of the telescope did with some Matlab code, double checked with the JamMT program and it gave out a visually simulation of the telescope, showing in the attachment.During the mounting of the telescope, the maximum power of the Laser has been used. The detail of the practical telescope shows as below:
Focal length
F1--50.2mm
F2--62.9mm
F3--125mm
Distance:(Set the output of EOM as origin)
L1--37.5cm
L2--47.5cm
L3--58.5cm
Final beam waist--82.5cm
Final beam size(radius)--44.0854 micrometer
During the last check, I found out the distance between the Beamsplitter and the first turning mirror is 5cm longer the optical scheme shows, caused by my counting error of the holes.But since behind this part there are some space left, so I thought maybe we can leave it like this.
Images attached to this report
