ShalikaSingh - 10:28, Monday 11 November 2024 (3823)
switched on some stuff in tama
1. Everything on bigfoot table
2. Server rack near pci
3. server rack near FC clean room
But, there is no internet(both wifi and ethernet) in tama right now. I don't see the ethernet on the pc. I don't know where to turn it on from.
Comments related to this report
ShalikaSingh - 11:00, Monday 11 November 2024 (3825)
It seems I was supposed to put some voltage values. I didn't put any. Perhaps shouldn't have turned on. FYI I only turned on the power switch on the voltage extension board, which was outside for the FC one, and inside for the PCI one.
MarcEisenmann - 14:09, Monday 11 November 2024 (3826)
I restarted wifi and ethernet, all hepa filters, old DGS and control pcs
The function generator used for timing is making a strange sound and should be monitored and probably replaced.
It seems I was supposed to put some voltage values. I didn't put any. Perhaps shouldn't have turned on. FYI I only turned on the power switch on the voltage extension board, which was outside for the FC one, and inside for the PCI one.
I restarted wifi and ethernet, all hepa filters, old DGS and control pcs
The function generator used for timing is making a strange sound and should be monitored and probably replaced.