Warning: Undefined variable $s in /var/www/public_html/osl/classes/DAO.php on line 959
NAOJ GW Elog Logbook
LOG-IN
Displaying report 1-1 of 1.
R&D (FilterCavity)
Print this report.
MichaelPage - 12:17, Friday 07 May 2021 (2482)Get code to link to this report
OPO replacement - ATC setup

Yuhang and Michael

We just did some adjustments to the beam using the lenses shown, to make sure the beam is travelling at about 76mm height along the screw hole line. It rises by about 1mm over ~50cm of travel. The mounts have also been adjusted to match the beam height.

This work will be on hold while the KAGRA ETMY is being cleaned.

Images attached to this report
2482_20210507051606_b4ddc66fd7b146419764fc5187f2eb25.jpeg