NAOJ GW Elog Logbook 3.2
Displaying report 1-1 of 1.
ZhaoYu-hang, TomuraAkihiro, - 19:02, Friday 24 November 2017 (597)
Beam Radius Measurement
This week we measured the beam radius after EOM. The measurement started from 100mm after EOM. We took 6 points and used Gaussian beam formula to fit. The result is shown as below.
The beam waist is 2.61667926e-05(m). We set the position of EOM as origin, the position of beam waist is 4.72853283e-02(m).
For details, please refer to the figure attached below.
The beam waist is 2.61667926e-05(m). We set the position of EOM as origin, the position of beam waist is 4.72853283e-02(m).
For details, please refer to the figure attached below.
Images attached to this report
Comments related to this report
Vertical: w0 = 2.67e-5 m, z0 = 4.73e-2 m
Horizontal: w0 = 2.77e-5 m, z0 = 4.62e-2 m
where w0 is the spot size at a beam waist and z0 = a position of the beam waist.
Images attached to this comment
