YoheiNishino - 11:41, Friday 04 March 2022 (2860)
Comment to Beam profile measurement in the clean room in ATC (Click here to view original report: 2856)
I measured the beam profiles again on March 3rd. I took 10 samples for each point and used an average of them.
| width | weist position* | |
| x | 0.1347+- 0.0006 mm | -35.6 +-0.5mm |
| y | 0.139+-0.004 mm | 11.8+-2.3mm |
* start position is two holes (~50 mm) distant from the center of the BS.
Images attached to this comment
