NAOJ GW Elog Logbook 3.2
Displaying report 1-1 of 1.
ManuelMarchio - 01:30, Tuesday 10 May 2016 (242)
Comment to Noise investigation - Tama-sized sapphire sample sitting on blocks (Click here to view original report: 241)
I made a calculation that might explain why I couldn't see any absorption signal.
The cross point between pump and probe changes position when there is a thick sapphire sample.
Details are in the attached slide.
This might also explain why in my simulations the simulated scan shows a thicker sample than the measured scan. I will include this effect in the simulations and check the result.
Images attached to this comment
