NAOJ GW Elog Logbook 3.2
[Shalika, Katsuki]
Both hydrogel and force gauge are on translation stage. We moved the force gauge up using the actuator on translation stage.See Fig 1 and Fig 2.
hydrogel is 8-9cm in length and 1.5mm thick. Each measurement take 2:30 mins
The laser is at center
0.26 N
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-02-01 PM.txt
0.28
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-06-13 PM.txt
0.30
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-09-53 PM.txt
0.32 N
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-13-41 PM.txt
0.34 N
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-18-30 PM.txt
0.36
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-22-30 PM.txt
0.38
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-26-43 PM.txt
0.40
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-30-35 PM.txt
0.42 N
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-34-02 PM.txt
0.44
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-37-43 PM.txt
0.46
Fri, Oct 25, 2024 4-41-56 PM
0.48
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-46-00 PM.txt
0.50
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-50-26 PM.txt
we moved the hydrogel laterally--the beam is not in center
0.51
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-54-17 PM.txt
0.48
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 4-59-40 PM.txt
0.46
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-03-11 PM.txt
0.44
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-06-56 PM.txt
0.42
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-11-10 PM.txt
0.40
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-17-25 PM.txt
0.38
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-21-26 PM.txt
0.36
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-24-52 PM.txt
0.34
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-29-02 PM.txt
0.32
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-32-51 PM.txt
The hydrogel maybe is a bit dry. So, the 0.32 was the minimum the translation stage could move.
We moved the hydrogel laterally to another side.
0.32
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-41-43 PM.txt
0.36
C:\Users\atama\Dropbox\Cell Birefringence\Measurement data\hydrogel\Force gauge v2\Fri, Oct 25, 2024 5-45-22 PM.txt
we stop coz the force change by itself.
the results (birefringence and diattenuation) for both points are attached.
Fig 1 , 2 - point where laser is at center
Fig 3, 4 - point where laser is on one side (not center)