NAOJ GW Elog Logbook 3.2
Displaying report 1-1 of 1.
ShalikaSingh - 14:45, Monday 09 December 2024 (3860)
TF of Opamp part of RF ckt
The RF part and opamp part are currently disconnected. The response of ckt Fig 1 is shown in Fig 2.
Although the bandwidth of Op27 is 8MHz, it doesn't behave well, after kHz range. Perhaps I should tweak the feedback resistor value. The cables used to measure are very short (<20cm)
Images attached to this report
